Pakistan is a right-hand-drive market that buys used Chinese trucks in volume — HOWO and Shacman are the two brands with real parts support in Karachi and Lahore. This page covers what actually decides whether a used dump truck or tractor unit clears at Port Qasim or Karachi Port in 2026: RHD, the five-year rule, Euro-II compliance, HS codes, the duty stack, and what a unit costs delivered.
We are a used truck exporter based in Hebei, China. We do not sell cars, and we do not sell vehicles we have not inspected. Every unit below can be shown on a live video call before you pay a deposit.
Right-hand drive is not optional in Pakistan
Pakistan drives on the left, so a vehicle registered there must be RHD. Chinese domestic trucks are LHD. There are only two clean ways to solve this:
- Source an RHD unit — some HOWO and Shacman export batches come RHD from the factory. We quote those first, because a factory RHD unit is always the cleanest file.
- Convert in China before shipment — where stock is LHD, we convert it in our own workshop in Hebei: steering box, drag link, pedal box, dashboard, steering column and wiring. It is a known job with a known cost, and it is documented stage by stage.
- Never convert after arrival — done at a Pakistani port it usually fails inspection and destroys resale value. RHD is a pre-shipment decision, not a local one.
Ask for the RHD status in writing on the quotation, with photos of the steering box and pedal box. If a supplier cannot show you those two photos, the “RHD” claim is not verified.
The rules that decide whether your truck clears
Pakistan’s Import Policy Order 2022 (SRO 545(I)/2022) sets conditions specifically for dumpers and prime movers imported for commercial use. All four must be met, and the paperwork must be in the shipping documents — not produced later at the port:
| Requirement | What it means for you | Where it comes from |
|---|---|---|
| Emission: Euro-II equivalent or higher, certified to a PSQCA-notified standard | Our WD615 (HOWO) and WP10 (Weichai/Shacman) engines meet it. If the unit you want carries an engine that will not pass, we fit a Euro-3 compliant engine in China before loading, with the new engine number on the invoice and inspection certificate. | IPO 2022, SRO 545(I)/2022 |
| OEM-manufactured, not re-built or re-badged | Chassis plate and engine number must match the OEM record. | IPO 2022 |
| Not older than five years | In November 2026 this means model year 2021 or newer for a clean file. | IPO 2022; extended to all commercial used vehicles by SRO 1895(I)/2025 |
| Pre-shipment inspection certificate from an inspection company on Appendix-H | Inspection happens in China before loading. It cannot be done at Port Qasim. | IPO 2022, Appendix-H |
On the age limit, read this carefully. SRO 1895(I)/2025 opened commercial import of used vehicles under PCT 8702, 8703, 8704 and 8711 for units under five years old, until 30 June 2026, and stated the age limit “may be removed” after that date. A Ministry of Commerce Office Memorandum dated 30 October 2026 is reported to confirm the five-year limit no longer applies from 1 July 2026 — but as of this writing that memorandum has not been officially published. Treat the five-year rule as still in force until your clearing agent confirms otherwise in writing. We will not book a unit that sits on the wrong side of an unpublished rule.
Separately, SRO 1065(I)/2026 applies a 30% regulatory duty to commercial imports of used vehicles under the same PCT headings. That sits on top of normal customs duty, and it is the single biggest reason a “cheap” unit stops being cheap.
HS codes and how the duty stack works
The HS code decides your duty rate, and the wrong code is the most common reason a used truck sits at the port accruing demurrage. These are the codes that apply to what we sell:
| HS code | Goods | Typical unit |
|---|---|---|
| 8704.2300 | Dumpers for on-road use, GVW over 20 t | HOWO 380 8×4, Shacman F3000 8×4 |
| 8704.2200 | Dumpers for on-road use, GVW 5–20 t | HOWO 380 6×4, FAW J6 6×4 |
| 8704.1090 | Dumpers designed for off-highway use | Mining-spec tippers (site-only, no road registration) |
| 8701.2000 | Road tractors for semi-trailers | HOWO T7H, Shacman X5000, FAW J6P |
The landed-cost stack at import is: customs duty (per Pakistan Customs Tariff, First Schedule to the Customs Act 1969) + additional customs duty + regulatory duty (30% for commercial used vehicles under SRO 1065(I)/2026) + sales tax at 18% on the duty-inclusive value + advance income tax. Sales tax is charged on a value that already includes duty, so the effective percentage on your invoice is always higher than the headline duty rate. Get the assessment from your clearing agent before you transfer a deposit — not after the container is on the water.
What a used Chinese truck costs, delivered
These are our current FOB China ranges for stock units. CIF Port Qasim or Karachi Port is quoted per unit, because ocean freight to Pakistan moves week to week.
| Unit | Year | FOB China |
|---|---|---|
| HOWO 380 6×4 dump truck | 2019 | USD 13,500 – 16,500 |
| HOWO 380 8×4 dump truck, 5.8 m body | 2018 | USD 15,500 – 18,500 |
| Shacman F3000 6×4 dump truck | 2020 | USD 15,500 – 19,000 |
| Shacman F3000 8×4 dump truck | 2021 | USD 19,500 – 23,500 |
| FAW J6 6×4 dump truck | 2020 | USD 12,500 – 16,000 |
| HOWO T7H tractor unit | — | USD 13,000 – 18,000 |
Real quoted example (November 2026): a 2022 HOWO 4×2 RHD bare chassis, no dump body, CIF Port Qasim — USD 16,000. New 10.00-20 tyres, if you want them fitted before loading, are USD 180 per tyre.
Note what that example tells you: an RHD, 2022, five-year-compliant bare chassis at USD 16,000 CIF is not cheaper than buying a complete 6×4 dump truck outright. If your plan is to build the body in Pakistan, price the body, the hydraulics and the labour before you compare — most buyers who run those numbers end up buying a complete unit.
Body size in cubic feet: 350–400 cft explained
Pakistani buyers quote dump body volume in cubic feet; Chinese spec sheets use cubic metres. This is the table to convert between them, and it is the reason two people can argue about “the same” truck and mean different bodies.
| Cubic feet (cft) | Cubic metres (m³) | Typical body |
|---|---|---|
| 350 cft | 9.9 m³ | Short 6×4 body, urban construction |
| 400 cft | 11.3 m³ | Standard 6×4 tipper |
| 450 cft | 12.7 m³ | 6×4, longer wheelbase |
| 500 cft | 14.2 m³ | 8×4 mining/aggregate |
| 550 cft | 15.6 m³ | 8×4 |
| 600 cft | 17.0 m³ | 8×4, 5.8 m body |
Conversion factor: 1 m³ = 35.31 cft. When you send us a requirement, send the cft figure and the body length in metres — we will confirm both against the chassis wheelbase before quoting, because a body that overhangs the rear axle is an inspection problem, not a preference.
What we actually change on a truck before it ships
Two jobs are done in our workshop in Hebei, before loading. Both are quoted per unit, both change the vehicle documents, and both must be decided before the export invoice is issued — not after the container is booked.
| Workshop job | Price | Lead time | Done before loading? |
|---|---|---|---|
| RHD conversion | USD 1,800 per unit | 7 working days | Yes — our workshop, Hebei |
| Euro-3 compliant engine replacement | USD 1,200 per unit | 3 working days | Yes — our workshop, Hebei |
| 4×2 → 6×4 conversion | Not offered | — | — |
Both prices are on top of the vehicle price and are fixed, not “depending on the job”. If you take both, they run in parallel — allow the longer lead time plus inspection, roughly 10 working days in the workshop before the unit goes to the port.
RHD conversion
Steering box, drag link and tie rod, pedal box, dashboard, steering column, wiring harness, and the firewall bracket on models that need it. This is routine work for us, not an experiment. What matters is that it happens in China, is photographed at each stage, and is written onto the quotation and the invoice.
USD 1,800 per truck, 7 working days. That is the conversion only — the truck itself is priced separately. Seven days is workshop time, so book it before you fix a sailing date.
Ask any supplier for three things before you pay: photos of the steering box and pedal box, the RHD part numbers used, and the words “right-hand drive” on the invoice itself. An invoice that does not say RHD is a truck that will be disputed at the port.
Engine replacement to a Euro-3 compliant unit
Pakistan requires Euro-II equivalent or better, certified to a PSQCA-notified standard. If the chassis you want carries an engine that will not pass, or an older engine you would simply rather not run, we fit a compliant unit in China before loading. WD615 (HOWO) and WP10 (Weichai/Shacman) family engines are available, and they are the same engines Pakistani workshops already know — parts are on the shelf in Karachi.
USD 1,200 per truck, 3 working days. That is a complete running engine fitted and tested, not a short block. The three days run in parallel with an RHD conversion, so ordering both does not add the two lead times together.
What travels with the truck: the new engine number on the export invoice, on the pre-shipment inspection certificate, and in the photo set. What does not travel: the old engine number. Declare the change to your clearing agent before booking — a declared engine change is normal and usually accepted; an undeclared one becomes a problem at the port.
The one conversion we will not do
4×2 → 6×4. Adding a rear bogie means replacing the frame section, re-routing the driveline, re-plumbing brakes and re-certifying axle loads. It does not hold up to a loaded test, and it does not pass inspection abroad. If you need 6×4, buy 6×4 — a complete 6×4 from us costs less than the chassis plus a conversion that fails.
Karachi Port or Port Qasim
Both work; the choice is about your clearing agent and your customer’s location, not about the truck.
- Port Qasim (QICT) — the usual route for containerised and RoRo truck shipments; slightly slower release, often cheaper terminal handling. Our Karachi quotes are CIF Port Qasim by default.
- Karachi Port (KICT / PICT) — faster for some agents, more expensive berth and storage; better if your buyer is in Sindh and needs the unit on the road quickly.
- Gwadar — viable for Balochistan and onward Afghanistan transit, but limited RoRo capacity and fewer experienced clearing agents.
Transit from Tianjin or Shanghai to Karachi is typically 18–26 days depending on routing and transhipment. Add 3–7 days for pre-shipment inspection and loading.
Parts support is why HOWO and Shacman win in Pakistan
Every buyer we speak to in Pakistan names parts availability before price. That is the right instinct: a 2018 HOWO with parts on every truck bazaar in Karachi is a better asset than a 2021 unit nobody can service.
HOWO (Sinotruk) and Shacman (Shaanxi) share the widest parts network in Pakistan — WD615 engine parts, HW19710 gearboxes, HC16 axles, and body hydraulics are all locally stocked to some degree. FAW Jiefang is thinner. Dongfeng is common on lighter trucks but has less heavy-dump support. We ship spare parts alongside trucks: see our parts and after-sales service.
Used Trucks in Stock — RHD Available, CIF Port Qasim
12 trucks available now. Prices are FOB China; CIF to your port quoted on request. Every unit is mechanically inspected and can be shown to you on a live video call before you pay.
Can't see the model you need? We source on request — message us on WhatsApp or send an enquiry.
Frequently Asked Questions
Can you supply a right-hand-drive HOWO chassis?
Yes. Where a factory RHD unit is available we quote that first; otherwise we convert in our own workshop in China before loading — steering box, pedal box, dashboard, steering column and wiring — with photos at each stage and the RHD status written on the quotation and invoice. Conversion is USD 1,800 per truck, 7 working days.
Can you fit a Euro-3 compliant engine before shipment?
Yes, in China, before loading. WD615 and WP10 family engines are available at USD 1,200 per truck, 3 working days. The new engine number is recorded on the export invoice, the pre-shipment inspection certificate and in the photo set. Tell your clearing agent before booking, because the engine number will differ from the chassis plate.
Can you convert a 4×2 truck into a 6×4 at your factory?
No. It requires a new frame section, rear bogie, driveline and brake re-plumbing, and it will not pass inspection abroad. Buy a 6×4 instead; the price gap is narrower than the conversion cost.
What does a used dump truck cost CIF Port Qasim?
FOB China ranges from USD 12,500 for a 2020 FAW J6 6×4 up to USD 23,500 for a 2021 Shacman F3000 8×4. CIF Port Qasim is quoted per unit. A 2022 HOWO 4×2 RHD bare chassis was quoted at USD 16,000 CIF Port Qasim in November 2026.
What is the maximum age of a used truck I can import into Pakistan?
Under SRO 1895(I)/2025, commercial imports of used vehicles under PCT 8704 were limited to units under five years old until 30 June 2026. A reported Ministry of Commerce memorandum of 30 October 2026 says the limit no longer applies from 1 July 2026, but it has not been officially published. Confirm with your clearing agent in writing before booking.
What tyre size do Pakistani buyers normally specify?
10.00-20 bias tyres are common on heavy tippers here. If you need new tyres fitted before loading, budget USD 180 per tyre. We confirm the size against the rim before the unit is loaded.
How do I verify that you are a real exporter before paying a deposit?
Ask for the customs registration certificate (报关单位备案证明), the business licence, and the export qualification record. We send all three on request — contact us and ask. VIN and full photo sets are released once a deposit is placed, because publishing VINs publicly exposes stock that other buyers have already paid to hold.
Do you ship spare parts with the trucks?
Yes. Filters, brake parts, clutch kits and body hydraulics can be consolidated into the same shipment — spare parts and after-sales.
Next step
Send us: body volume in cft (or m³), brand preference, model year range, RHD requirement, and destination port. We will reply with photographs, a video of the engine running, the specification sheet and a CIF price to Port Qasim. If nothing in stock matches, we source on request — message us on WhatsApp.












